When the altitude exceeds 2,000 meters (6,500 feet), the load usage restrictions of the Garvit power supply are as follows:1. The ambient temperature of the fanless model decreases at the rate of e...
Active power factor correction circuits can be divided into single-stage and double-stage power converters. The separate design is adopted. Compared with the single-stage converter, the two-stage s...
The lighting system adopts a direct drive designThe total of the upper and lower limits of the LED operating voltage range must be within the output voltage range of the LED power supply. For examp...
When the output current of the power supply exceeds the rated current, the protection circuit will act to reduce or cut off the output power.The overcurrent characteristics are divided into the fol...
PFC (Power Factor Correction) power factor correction is mainly to improve the ratio of the effective power to the apparent power at the AC input of the power supply. Generally, the power factor of...
The switching power supply will generate a short (1/2~1 power cycle, EX: 60Hz power supply 1/120~1/60 second) high current (about 20~100A according to product design) at the moment when the input p...
Compared with other parts in the power supply, the life of the cooling fan is relatively short (usually the mean time between failures is about 5,000 to 100,000 hours); therefore, if you can change...
Generally, there are two reasons for the crash of the power supply in use.********** may be overload protection caused by instantaneous overload of the load. It is recommended to increase the outpu...
BeautyPower's multi-output power supplies (such as 2 sets of outputs or more) have minimum load requirements. Therefore, it is especially recommended to read the product specification carefully bef...
May I ask if the power supply of BeautyPower can be used for 45~440Hz, and if so, is there any other influence?BeautyPower's standard products can generally be used in this frequency range. However...
1. In order to prolong the life of the POWER SUPPLY, it is recommended to select a model with an output power rating of 30% more. For example, if the system needs a 100W power supply, it is recomme...